There are 18 names in this directory beginning with the letter T.
Definition: (Tile Council of North America)
An organization of manufacturers serving the ceramic tile industry, with overlapping interest in the stone tile industry, particularly in installation. The TCNA publishes the Handbook for Ceramic Tile Installation and serves as the Secretariat for the ANSI accredited A108 and A118 committees. Established in 1945 as the Tile Council of America (TCA), it became the Tile Council of North America (TCNA) in 2003 to reflect its membership expansion to all of North America - Canada, Mexico and the United States.
Definition: A pattern for a repetitive marking or fabricating operation.
Definition: A flooring surface of marble or granite chips in a cementitious or resinous matrix, which is ground and finished after setting.
Definition: Surface quality of stone independent of color.
Definition: Any of the rough surface finishes used in dimension stone, selected for aesthetic reasons or as friction performance for walking surfaces.
Definition: A textured surface treatment applied by brief exposure to intense heat.
Definition: Dimension stone units that are 2” (50 mm) or less in thickness.
Definition: A flat or profiled strip of stone projecting above the floor between the jambs of a door, often marks the transition between two different flooring materials. Also known as a “saddle.”
Definition: A thin modular stone unit, less than ¾” (20 mm) thick, and not exceeding 24” (600 mm) in its greatest dimension.
Tilt Shop Cart
Definition: A device used in stone fabrication areas to move slabs and/or cut-to-size pieces within the shop. The cart has a bed that tilts, allowing it be loaded with a slab in a vertical orientation but unload the same slab in a horizontal orientation.
Definition: A powder used in the polishing of granite with a talc-like appearance and applied with a felt pad and slow speed buffer.
Definition: The permissible limit of variation from the specified dimension.
Definition: A finish that customarily has four, six, or eight parallel, concave grooves to the inch. See also bush hammered.
Definition: A characteristic of light colored onyxes and some light colored marbles allowing light to diffuse as it passes through.
Definition: A variety of limestone formed by chemical precipitate from hot springs. Some varieties of travertine take a polish and are known commercially as marble. ASTM C119 classifies travertine in both the limestone and the marble groupings.
Definition: A flat stone used as the top (horizontal) walking surface on steps.
Definition: The framing or edging of openings and other features on the interior or exterior of a building, including baseboards, picture rails, cornices, and casings.
Definition: A weathered, aging finish created when the stone is tumbled with sand, pebbles, or steel bearings.